Stress Free Sounds

Listening room Sounds Pink vs brown noise

Noise

Pink noise vs brown noise: hear both

Two steady noises on one page. Play one, then the other, and keep the one you’d rather leave on.

Plays right here. No account, no YouTube, no ads in the player.

Listen side by side

Pink noise

4-minute loop · plays here

Press play.

Sound: Pink noise 10m30s by vrlmrtnz on Freesound (CC0). Trimmed to a 4-minute loop, highs softened slightly, and level-matched.

Brown noise

4-minute loop · plays here

Press play.

Sound: Deep smooth brown noise by Trebblofang on Freesound (CC0). Trimmed to a 4-minute loop and level-matched.

Starting one pauses the other, so you can switch back and forth. Both files are matched to the same loudness, so neither jumps out when you switch.

What the difference is

Our two files, measured

Chart of level against frequency for our pink and brown noise files. Both lines fall from left to right. The brown line falls much more steeply than the pink one. Dashed guides show 3 and 6 decibels per octave.
Measured from the two files that play on this page, not a textbook drawing. Level is shown relative to each file’s level at 1 kHz, on a log frequency scale. Our pink falls about 3 dB per octave from 50 Hz to 1 kHz, as the definition says, and a little faster above that, where we softened the top slightly. Our brown falls faster than the textbook 6 dB per octave: about 7.6 dB per octave below 1 kHz and 11.5 above. So it has even less treble than textbook brown noise. Below about 40 Hz both lines get shallower, and the pink one goes flat. We also cut rumble below 20 Hz on the pink file.

Which one to pick

There’s no right answer here. If pink still sounds a little bright, try brown. If brown feels too heavy or muffled, go back to pink, which sits between brown and white noise.

Each one also has its own page with a sleep timer: pink noise and brown noise. Prefer the sound of a real fan? Try fan noise.

For listening in bed

Sleep with sound on, comfortably

Soft headband headphones lie flat, so you can drift off on your side with the sound still playing.

See sleep headphones under $100

Headband Sleep is our sister site. It earns a commission on qualifying Amazon purchases.

More sounds that play right here

All 8 soundsBack to the listening roomGet new sounds by email

Good to know

Is it free?

Yes. No account, no sign-up, no ads in the player. Both files play from this site, so nothing hands you off to YouTube.

Is brown noise the same as red noise?

Usually. The two names are often used for the same thing, though “red noise” sometimes means noise with even more low end.4 “Red” comes from the white-light analogy: red is the long-wavelength end. “Brown” comes from Robert Brown and Brownian motion.7

Do they loop all night?

Each one loops a 4-minute track with a soft crossfade where the end meets the start. For a sleep timer, use the pink or brown page. Your browser and device have to stay awake and the tab has to stay open.

Sources

  1. ATIS Telecom Glossary, “white noise”: “Noise having a frequency spectrum that is continuous and uniform over a specified frequency band. Note: White noise has equal power per hertz over the specified frequency band.”
  2. ATIS Telecom Glossary, “pink noise”: “In acoustics, noise in which there is equal power per octave.” (The same wording is in Federal Standard 1037C.)
  3. HyperPhysics, Georgia State University, “Equalization of Sound Systems”: “the power of pink noise per Hz of bandwidth decreases by a factor of two or 3 decibels per octave.” (Archived copy.)
  4. Physics, Waves, Music (Physics Department, University of Modena and Reggio Emilia), “Types of noise”: “With the same intensity per hertz, the octave between 10,000 and 20,000 Hz alone contains half the energy of the noise”; brown noise: “Its intensity per hertz of bandwidth decreases as the inverse of the square of the frequency (an attenuation of 6 dB from one octave to the next in the logarithmic scale).”; “The name ‘red noise’ is often used as a synonym of brown noise; sometimes it indicates instead noise in which low frequencies have even higher intensity”.
  5. Paul Bourke, “Generating noise with different power spectra laws” (1998): the power spectrum is proportional to 1/fβ; “When beta is 0 the noise is referred to white noise, when it is 2 it is referred to as Brownian noise”; “Brownian noise is most easily generated by integrating white noise.”
  6. Audacity Manual, “Noise”: “Pink noise and Brownian noise both have more energy at lower frequencies, especially Brownian, which has the most muffled, low pitched sound of the three types.”
  7. Wikipedia, “Brownian noise”: “The term ‘Brown noise’ does not come from the color, but after Robert Brown, who documented the erratic motion for multiple types of inanimate particles in water”; “The term ‘red noise’ comes from the ‘white noise’/‘white light’ analogy; red noise is strong in longer wavelengths”.

Page updated Nov 5, 2026. The chart is our own measurement of our own files.